Metering for ambient lighting conditions and flash metering has totally different requirement. The metering for ambient lighting condition is done before the shutter of the camera is opened. In the Canon EOS camera, ambient light metering is done when you press the shutter button halfway down. Flash Pulse metering however is done when the shutter button is press fully down. There are two ways to meter for flash pulse automatically. One way is by measuring the flash pulse as it is being released. The other way is to do a pre-flash test. This is achieved by a low powered test pulse of a calculated brightness before the shutter opens.

These are the two metering system used by the Canon flash metering system. The Through the Lens (TTL) metering system adopts the first method of metering for flash automatically described above. Canon first introduces the TTL metering system with their T90 model during the 1980s. This feature was later incorporated in the EOS line of camera as a standard feature. As such the Canon T90 is the only non EOS that can use the TTL flash-metering system.

TTL system works by calculating the light which is reflected of the subject and entering the lens after emission of the Flash Pulse. In short the TTL system actually measures the light which is reflected off from the film surface in real time. This is archived by the use of the “Off The Film” (OTF) Sensor. Once there is enough light entering the sensor, the flash will be turn off. As Digital Camera does not use films, the Canon Digital EOS Camera does not support the TTL flash metering system.

The progression of the TTL flash metering system is as follows:

1. Once the shutter button is depress midway, the metering for ambient lighting takes places. The speed of the shutter and size of the aperture is programmed by the camera or User depending on which program mode the camera is using. For example whether the camera is using the AV, P or M mode.

2. Once the shutter button is depressed all the way down, the internal mirror is flipped up and the film is exposed. Then Power is sent to the flash unit illuminating the area. The duration of the flash burst is determined by the OTF sensor which meter for a normal operational condition. If the picture is taken under bright lighting situation, the auto fill reduction will apply reducing the illumination of the flash.

3. Once the foreground has been adequately illuminated, power to the Flash unit is cut off which extinguishes the flash light. The shutter remains open for the entire duration of the shutter’s speed time. The shutter then closes and the mirrors flips back down. Some camera has a Flash exposure Confirmation Led light and if the flash metering operation is successful, this light will glow.

It is also important to note that as the OTF sensor reflects the amount of light of the film, the composition of the film itself will also affect the amount that is reflected off. But as all camera are calibrated to work with normal film this will not become an issues except with special films like slide films which has different level of tolerances.

Similar Posts:

• Canon Camera Basic Guide Flash metering
• The Canon TTL Flash Metering System
• Canon Camera Basic Guide Flash metering – E-TTL system
• Breakdown of the function of the Canon EOS Modes setting
• Explanation of the Canon EOS Flash Photography

Tags: Photography

This entry was posted on Friday, November 28th, 2008 at 8:18 am and is filed under Photography. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.